HIGH FLOW HAND SIPHON PUMP- Package includes 1*10ft/3 meters flexible and durable PVC transparent hose,1*high flow hand siphon pump,1*control valve,4 *hose clamps. Rubber hand pump, extended hose, that starts siphoning liquid flow quickly.
EASY TO USE- The fuel transfer siphon pump built-in inlet and outlet valve to prevent liquid backflow during pumping. And we configured a complete 3m PVC hose. You can cut the hose into 2 or 3 hoses of suitable length as needed.High-flow hoses and large-bore ball pumps are faster at pumping, pumps 10L/Min.
WIDE APPLICATION- Lightweight and portable siphon hand fuel pump, for gasoline, oil, air, water and other common liquids, ideal for emergency gas transfer. Suitable for various vehicles without anti-theft filter net, motorcycle, boat, lawn mower, brush cutter, hedge trimmer, etc, also can be a water changer for fish tank, swimming pool at you home.
CONTROLLABLE VALVE- The controllable valve is configured to prevent backflow and direct extraction, adjust flow, on/off controllable and convenience. The arrow indicates a flow direction. Safe and easy transfer of petrol and other fluids through siphoning into the exhaust system. Use 4 hose clamps to secure the pump, control valve and hose connection.
WARM TIPS- The liquid you want to siphon must be HIGHER than the container that flows into. The end of the input hose must be kept inside the liquid, not just on the surface. There is an arrow mark on the pump. Place the pump in the direction of the arrow down. The greater the drop between the two containers, the greater the flow.
Package Included:
1 x 10ft/3 meters flexible and durable PVC transparent hose
1 x high flow hand siphon pump
1 x control valve
4 x hose clamps

Installation Introductions
Step 1: Cut the 3 meters hose into 2 or 3 hoses of suitable length as needed.
Step 2: Install the hose to the pump and control valve separately.
Step 3: Use 4 hose clamps to secure the pump, control valve and hose connection.
Step 4: Place the pump in the direction of the arrow down.
Step 5: Put the input hose into the source container.
Step 6: Put the output hose into the target container.
Step 7: Squeeze the pump 3-5 times.
Step 8: The liquid will flow.

Warm Tips:
*1. The liquid you want to siphon must be HIGHER than the container that flows into.
*2. The end of the input hose must be kept inside the liquid, not just on the surface.
*3. There is an arrow mark on the pump. Place the pump in the direction of the arrow down.
*4. When siphoning fuel, there must be no anti-theft fuel filter in the fuel tank.
*5. Before using the siphon pump, the gas in the hose should be exhausted.
*6. The greater the drop between the two containers, the greater the flow.